IL PREZZO SI RIFERISCE AL SINGOLO WOOFER.
This CX15N351 is designed to provide an excellent frequency response linearity with very low distortion.
This coaxial use a strongest unique neodymium magnetic structure that guarantee high dynamic and sensitivity for both components.
The mid-bass section use a 3,5” voice coil design provides a very high power handling, especially recommended in comparison to a standard 3" voice coil, demodulation ring get a fastest time response and lower distortion.
The compression driver use a 2.5-inch diaphragm with a 1.4 inch throat featuring several state of the art technologies.
The diaphragm and suspension are formed from 0.05mm thick pure titanium.
The unique magnetic structure allow to get a single point source that providing coherent wave front.
CARATTERISTICHE
- Nominal Diameter:35.5 / 1.4 mm/inch
- Rated Impedance:8 Ω
- Program Power:180 W
- Power Handling Capacity:90 W
- Sensitivity 1 W, 1 m:110 dB
- Frequency Range:700 - 20000 Hz
- Minimun Impedance:7.9 Ω
- Voice Coil Diameter:63.7 / 2.5 mm/inch
- Voice Coil Material:Edgewound A1
- Number of layers:1 - Outside
- Diaphragm Material:Pure Titanium
- Diaphragm Design:Dome
- Suspension Material:Pure Titanium
- Suspension design:Progressive
- BL factor:10.4 T · m
- Flux density:2.0 T
- Phase plug design:3 slot
- Phase plug material:Aluminium
- Magentics:Neodymium
- Voice Coil Demodulatuon:Copper ring
- Throat Diameter:36 / 1.4
- Nominal coverage (-6dB):60°°
- Cut-off Frequency:800
- Material:Structural Polyurethane
- Nominal Diameter:380 / 15 mm/inch
- Rated Impedance:8 Ω
- Program Power:900 W
- Power Handling Capacity:450 W
- Sensitivity:101 dB
- Frequency Range:40 - 3000 Hz
- Effective Piston Diameter:330 / 13 mm/inch
- Max Excursion Before Damage (peak to peak):39 / 1.5 mm/inch
- Minimun Impedance:6.8 Ω
- Voice Coil Diameter:87 / 3.4 mm/inch
- Voice Coil Material:Copper
- Voice Coil Winding Depth:16.5 / 0.65 mm/inch
- Number of layers:2
- Kind of layer:inside / outside
- Top Plate Thickness:11 / 0.43 mm/inch
- Cone Material:No pressed pulp
- Cone Design:Curved
- Surround Material:Polycotton
- Surround Design:M - roll
- Resonance frequency:Fs - 55 Hz
- DC resistance:Re - 5.6 Ω
- Mechanical Factor:Qms - 6
- Electircal Factor:Qes - 0.27
- Total Factor:Qts - 0.26
- BL Factor:Bl - 23.5 T · m
- Effective Moving Mass:Mms - 80 g
- Equivalent Cas air load:Vas - 110 liters
- Effective piston area:Sd - 0.086 m²
- Max. linear excursion ( mathematical):Xmax - 5.5 mm
- Voice - coil inductance @ 1 kHz:Le1K - 1.65 mH
- Half-space efficiency:Eff - 6.53%
- Overall Diameter:393 / 15.5 mm/inch
- Bolt Circle Diameter:371 - 376 / 14.6 - 14.8 mm/inch
- Bolt Hole Diameter:6.5 / 0.3 mm/inch
- Front Mount Baffle Cut-out:354 / 13.9 mm/inch
- Rear Mount Baffle Cut-out:354 / 13.9 mm/inch
- Depth:164 / 6.4 mm/inch
- Volume occupied by the driver:3.8 / 0.13 liters/ft³