Accesso al pannello di amministrazione dell'eshop >> (Questo messaggio lo vedi solo tu!)

Eighteen Sound HD2000

Driver HF 1,4" con magnete in ferrite e bobina da 2,4", 140W program. Spedizione GRATIS!

Codice prodotto: 0421T8H610
Disponibile in 2/5 giorni

o paga in 3 rate senza interessi con Scalapay

HF Ferrite Drive - Driver in ferrite

Key Features

  • Best performance to price 1.4” exit driver on the market
  • 108 dB 1W / 1m average sensitivity
  • 1.4 inch throat exit
  • 2.4 inch edgewound aluminum voice coil
  • 140 W program power handling
  • Pure Titanium diaphragm assembly
  • Proprietary phase plug design
  • HF copper sleeve for reduced distortion and increased output
  • Available also in 2" exit version



The HD2000 1.4 inch exit high frequency compression driver has been designed for use in high quality audio systems.


The titanium diaphragm is produced in-house and has been developed to assure unmatched transient response. A proprietary treated Nomex former with edge-wound copper-clad aluminum wire (CCAW) 60mm voice coil completes diaphragm assembly. It has been made by joining the proprietary-treated Nomex former directly to the titanium dome through its upper bend edge. In comparison with a usual straight former joint, the driver design assures extended frequency energy transfer for improved response linearity and unparalleled reliability. This feature  maintains proper motion control of the dome in real working conditions. Due to its physical properties, the proprietary-treated Nomex former shows a 30% higher value of tensile elongation at working operative temperatures (200°C) when compared to Kapton. Moreover, this material is suitable to work also in higher moisture-content environments.


Equipped with Proprietary Phase Plug 3P architecture, the HD2000 has been designed to give a smooth coherent wave front at the horn entrance in all working frequency ranges with a high level manufacturing consistency. The phase plug with its short openings and high flare rate, assures low distortion with excellent mid-high frequency reproduction.


The HD2000 powerful ceramic magnet assembly has been designed to obtain 16 kGauss in the gap within a compact ferrite motor structure. The motor structure is equipped with copper ring on the pole piece, reducing inductance effect and distortion.


General Specifications HF

Throat Diameter 35,5 mm (1,4 in)
Rated Impedance 8 Ohm
D.C. Resistance 5,9 Ohm
Minimum Impedance 7,6 Ohm at 5100 Hz
Le (1kHz) N/A
Program power (8) 140W
Sensitivity (9) 108 dB
Frequency Range 1000 Hz - 20 kHz
Diaphragm material Titanium
Voice Coil Diameter  61mm (2,4 in)
Voice Coil winding material Edge-wound aluminum Ribbon
Magnet material Ferrite
Flux Density 1,6 T
Bl Factor N/A Tm


Mounting information

Overall diameter 145 mm (5,7 in)
N. of mounting holes and bolt 4xM6 holes at 90° Ø 102 mm (4 in)
Bolt circle diameter 102 mm (4,02 in)
Total depth 65 mm (2,56 in)
Net weight 2,8 Kg (6.16 lb)
Shipping weight 3 Kg (6.6 lb)
Packaging Dimensions 3 Kg (6.6 lb)
Continua lo shopping! scopri altri prodotti della sezione compression drivers o di Eighteen Sound

Le recensioni dei nostri clienti

Vedi tutti i feedback