HF Ferrite Drive - Driver in ferrite
- 109 dB SPL 1W / 1m average sensitivity
- 2 inch exit throat
- 3 inch edgewound aluminum voice coil
- 200W program power handling
- Polyethilene - Titanium diaphragm assembly
- Copper shorting ring on pole pieces
General Specifications HF
Throat Diameter | 50 mm (2 in) |
Rated Impedance | 8 Ohm |
D.C. Resistance | 6,2 Ohm |
Minimum Impedance | 8 Ohm at 3500Hz |
AES Power | 100W above 1,2 kHz |
Program power (8) | 200W above 1,2 kHz |
Sensitivity (9) | 109 dB |
Frequency Range | 500Hz - 20kHz |
Recomm. Xover Frequency | above 800Hz (12dB/oct slope) |
Diaphragm material | Titanium - Polyethilene |
Voice Coil Diameter | 75 mm (3 in) |
Voice Coil winding material | Edge-wound aluminum |
Magnet material | Ferrite |
Flux Density | 1,8 T |
Bl Factor | 12,8 N/A |
Polarity | Positive voltage on + terminal gives positive pressure in the throat |
Mounting information
Overall diameter | 169 mm (6,65 in) |
N. of mounting holes and bolt | 4 M6 holes 90° at Ø 102 mm (4 in) |
Bolt circle diameter | 102 mm (4 in) |
Total depth | 75,4 mm (3 in) |
Net weight | 5,2 Kg (11,46 lb) |
Shipping weight | 5,3 Kg (11,60 lb) |
Packaging Dimensions | 5,3 Kg (11,60 lb) |
