Accesso al pannello di amministrazione dell'eshop >> (Questo messaggio lo vedi solo tu!)

Eighteen Sound 12MB700

Midbass woofer 12" con magnete in ferrite e bobina da 3", 600W program – Spedizione GRATIS!

Disponibile in 2/5 giorni lavorativi
239,00
300,00

o paga in 3 rate senza interessi con

Very High Output MB Ferrite Transducer - Altoparlante in ferrite

Key Features

  • 101,5 dB SPL 1W / 1m sensitivity
  • 75 mm (3 in) Interleaved Sandwich Voice coil (ISV)
  • 450 W AES power handling
  • Double Demodulating Rings (DDR) for lower distortion
  • Improved heat dissipation via unique basket design
  • Weather protected cone and plates for outdoor usage
  • Ideal for compact two way and multiway systems

 

Description

The 12MB700 is a very high sensitivity (101.5 dB 1W/1m) midbass driver with high power handling capabilities. The 12MB700 can be used as either a bass/mid driver in compact 2-way reflex enclosures or as a direct radiating or horn loaded, dedicated midrange driver, in multi-way touring and fixed installation concert and arena systems. Its curvilinear paper cone made from a special high strength wood pulp, has been designed to achieve the best possible linearity within its intended frequency range and to control bell-mode resonances around the cone circumference. The cone is carried by a multiroll suspension formed of a linen-like material, which is more resistant to aging and fatigue than traditional materials. The 75 mm diameter state-of-the-art voice coil is similiar to those fitted to our top-of-the-range 18" and 15" models but it is wound with aluminum wire. It employs our Interleaved Sandwich Voice coil (ISV) technology in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. This results in an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard. The excellent performance capabilities of this loudspeaker are further enhanced by the Double Demodulating Rings (DDR) designed to dramatically reduce the intermodulation and harmonic distortion and improve transient response. The magnetic structure has been optimized using FEA CAD resource, maximizing the flux density in the voice coil gap. Voice coil cooling has been achieved by incorporating airways between the chassis back plate and the top plate of the magnet, allowing heated air from the voice coil and gap to be channeled away and dissipated by the chassis basket. Due to the increasing use of high power audio systems at outdoor events or in marine environments, the ability to perform properly under inclement weather conditions is a key feature in Eighteen Sound philosophy. Hence, an exclusive treatment has been applied to the cone giving it water repellent properties. In addition, another special treatment has been applied to the top and back plates making the transducer far more resistant to the corrosive effects of salts and oxidization.

 

General Specifications

Nominal Diameter 300 mm (12 in)
Rated Impedance 8 Ohm
AES Power 450 W
Program Power 600 W
Peak Power 1200 W
Sensitivity 101,5 dB
Frequency Range 60 - 5000 Hz
Power Compression @-10dB 0,4 dB
Power Compression @-3dB 1,5 dB
Power Compression @Full Power 2,8 dB
Max Recomm. Frequency 4000 Hz
Recomm. Enclosure Volume 10 - 80 lt. (0,3 - 2,83 cuft)
Minimum Impedance 5,7 Ohm at 25°C
Max Peak To Peak Excursion 22 mm (0,87 in)
Voice Coil Diameter  75 mm (3 in)
Voice Coil winding material aluminum
Suspension M-roll, Polycotton
Cone Curvilinear, Paper

 

Thiele Small Parameters

Fs 49 Hz
Re 5 Ohm
Sd 0,0531 sq.mt. (82,31 sq.in.)
Qms 4,7
Qes 0,2
Qts 0,19
Vas 101 lt. (3,57 cuft)
Mms 41 gr. (0,09 lb)101 lt. (3,57 cuft)
BL 17,8 Tm
Linear Mathematical Xmax ± 4,5 mm (± 0,18 in)
Le (1kHz) 0,9 mH
Ref. Efficiency 1W@1m (half space) 99,6 dB

 

Mounting information

Overall diameter 315 mm (12,4 in)
N. of mounting holes and bolt 8
Mounting holes diameter 7,15 mm (0,28 in)
Bolt circle diameter 296 - 300 mm (11,65 - 11,8 in)
Front mount baffle cutout ø 282 mm (11,1 in)
Rear mount baffle cutout ø 282 mm (11,1 in)
Total depth 147,5 mm (5,82 in)
Flange and gasket thickness 16,5 mm (0,65 in)
Net weight 8 kg (17,66 lb)
Shipping weight 9 kg (19,84 lb)
Packaging Dimensions 9 kg (19,84 lb)

Prodotti correlati

Continua lo shopping! scopri altri prodotti della sezione mid basses woofers o di Eighteen Sound

Le recensioni dei nostri clienti

Vedi tutti i feedback